The Strung Guitar Processor is a full featured guitar tutor and musical tool with advanced functions designed to help you make the most of your instrument. Up to 20 virtual guitar or bass fretboards, Switch to left handed fretboard display, Re-tune the fretboards to any alternative tuning, Pan each virtual string to a different speaker and change the way strings are played, Chord generator with 66 chords in each key (or create your own), Photos of all the most commonly used chords. Up to six different fingering diagrams for each chord, Any scale you could ever want, including modes (or create your own), Create chord sequences to play along with. Transpose entire songs to a new key, Analyse audio tracks to find out which notes are being played in your favourite songs, Advanced vocal removal function leaves just the backing track. Slow tracks down to learn them more easily, Keyboard and musical notation displays, Input chords or scales from your midi keyboard, see them on the virtual fretboards, Guitar tuner and Metronome built in, Audio recorder to record yourself whilst playing a track in the background, Lessons for beginners, Integrated help file, Windows 98 / Me / 2000 / XP / Vista, 512 Mb memory at least (1Gb recommended), 55 Mb hard disk space, 1024x768 screen resolution at least (1280x1024 recommended), Preferably a good sound card. CPU produced in the last 7 years (2000 onwards), This is the first version of Strung. We will be adding many more functions over the coming months, here are a few: Improved Strum control - Currently, Strung has a very simple strum control. We have plans to make this much more realistic, enabling you to create complicated strum patterns more like a human player. We will be adding string clicks and slides, and the ability to add tremolo and string bends. Tune mode - With this release, Strung is limited to 'Pattern Play Mode'. This enables you to strum or arpeggiate chords and play scales. The next version will have a 'Tune Play Mode'. This will allow you to create melodies, harmonies and lead breaks. You will be able to include advanced playing techniques such as hammer-on and pull-off, bend strings to change the pitch of the note, slides and tremolo. Mix down - Strung will soon have the ability to mix down a chord sequence or tune to a single WAV file. You can then use the resulting WAV file in programs like Cakewalk, Cubase and AWave. We also hope to output Strung sequences as MID files. Extended Midi capabilities - Currently you can enter chords or scales from your Midi keyboard. Future releases will allow you to play tunes and songs in realtime from Midi keyboards, and to read MID files. Improved Editor - This version of the Editor has limited functionality. Future versions will have many more functions, eventually bringing it up to the standard of Wavelab or SoundForge. More instruments - We will be adding Mandolin and Banjo to the Guitar menu. There will also be a choice of guitar sample sets, currently limited to Electric Guitar and Bass. We will be adding Acoustic guitar, 12 string guitar and nylon strung Classical guitar soon. Added effects - Currently, the tone of each fretboard can be altered using the graphic equalizer. Will have Reverb, Chorus and other effects. Frequency analysis - With this release, analysing the notes in a track is laborious. By June 2008 we will completely automate this process, allowing you to analyse a track in the editor and then watch it played for you in the virtual fretboard with a single button click. Tabulature input/output - Many songs are available on the internet in guitar tab notation. Strung will soon have the ability to read this format and output your songs in tab. Improved notation display - Strung's current notation display is very primitive. Future releases will have a much improved notation section. Stereo vocal removal - This release produces a mono track from a stereo track when you remove the vocal line from it. The next release will give you the option to 're-stereoize' the output file. Playlist editor - Currently, you can create, save and load playlists. The next release will have a playlist editor and favourites editor allowing you to modify your playlists. How do I? Help file - The next update of Strung will have an extra help file giving detailed instructions about the more advanced functions. So buy it now while it's only £35, you will get free updates for life. This is a virtual fretboard showing the chord A major with the open fingering diagram. This is the first version of Strung. We will be adding many more functions over the coming months, here are a few: Improved Strum control - Currently, Strung has a very simple strum control. We have plans to make this much more realistic, enabling you to create complicated strum patterns more like a human player. We will be adding string clicks and slides, and the ability to add tremolo and string bends. Tune mode - With this release, Strung is limited to 'Pattern Play Mode'. This enables you to strum or arpeggiate chords and play scales. The next version will have a 'Tune Play Mode'. This will allow you to create melodies, harmonies and lead breaks. You will be able to include advanced playing techniques such as hammer-on and pull-off, bend strings to change the pitch of the note, slides and tremolo. Mix down - Strung will soon have the ability to mix down a chord sequence or tune to a single WAV file. You can then use the resulting WAV file in programs like Cakewalk, Cubase and AWave. We also hope to output Strung sequences as MID files. Extended Midi capabilities - Currently you can enter chords or scales from your Midi keyboard. Future releases will allow you to play tunes and songs in realtime from Midi keyboards, and to read MID files. Improved Editor - This version of the Editor has limited functionality. Future versions will have many more functions, eventually bringing it up to the standard of Wavelab or SoundForge. More instruments - We will be adding Mandolin and Banjo to the Guitar menu. There will also be a choice of guitar sample sets, currently limited to Electric Guitar and Bass. We will be adding Acoustic guitar, 12 string guitar and nylon strung Classical guitar soon. Added effects - Currently, the tone of each fretboard can be altered using the graphic equalizer. Future releases will have Reverb, Chorus and other effects. Frequency analysis - With this release, analysing the notes in a track is laborious. By June 2008 we will completely automate this process, allowing you to analyse a track in the editor and then watch it played for you in the virtual fretboard with a single button click. Tabulature input/output - Many songs are available on the internet in guitar tab notation. Strung will soon have the ability to read this format and output your songs in tab. Improved notation display - Strung's current notation display is very primitive. Future releases will have a much improved notation section. Stereo vocal removal - This release produces a mono track from a stereo track when you remove the vocal line from it. The next release will give you the option to 're-stereoize' the output file. It provides a variety of functions that determine how the current fretboard operates and what is displayed within it. Click on the diagram for detailed help. This is the Play Parameters dialog. It provides a set of controls that determine how any chords or scales are played. The Strum and Arpeggio tabs control the playing of chords, the Scale tab controls how scales are played, and the Sequence tab allows you to create songs using the patterns displayed in any open fretboards. Click on the diagram for detailed help. The Pattern Generator dialog contains three tabs. The first two tabs create chords and scales in any key. The third tab shows a list of chords and scales that contain the notes in the currently displayed pattern. Click on the diagram for detailed help. This is the audio editor. To open it, click File from the main menu and choose Open Editor (or press Ctrl+E on your keyboard). It has a number of useful functions enabling you to learn songs more easily. Click on the diagram for detailed help. Important part of Learning guitar tutor free download is not to
learn any wrong habits ,which takes awaful lots of time to be undone.
You also need to consider if Learning guitar tutor free download is a
priority for you now, and if so you will need to be able to set aside
time for lessons and practice. The Guitar Emulator and synthesizer also
known as synth is a compact, smart debugging environment package for
general purpose CPU's including this series. The Guitar Emulator and
synthesizer also known as synth is similar, but lacks the pick. The most
important thing in Learning guitar tutor free download is daily
practice. The goal of the Guitar Emulator and synthesizer also known as
synth is not to provide the most accurate emulation of these old
guitars. I'm told a Guitar Emulator and synthesizer also known as synth
is in existence which allows me to download programs designed for PCs.
This Guitar Emulator and synthesizer also known as synth is able to run
strings at about the same speed as the original guitars. This way of
learning guitar is how I taught myself how to. The nice thing about this
Guitar Emulator and synthesizer also known as synth is that apart from
the Guitar Emulator and synthesizer also known as synth code most of the
specific code is based on what I covered. Click View from the main menu and choose Notation from the sub menu (or press Ctrl+D). You can click to the left of the yellow line to add or delete notes. This dialog allows you to specify the parameters used in the vocal removal function. Tracks vary in the way they are recorded, and so the vocal removal function varies in the way it performs. Some tracks might respond badly to having the vocal removed, others superbly. WAV files ripped from a CD are the best type of track to remove a vocal line from. Low quality MP3, or OGG files may result in a garbled output. When you have adjusted the values to your satisfaction, click the 'Process' button. Strung will save the resulting mono WAV file in the same folder and with the same name as the original but suffixed with '_VoxCut'. Depending on how the track was recorded, you may find some backing vocal, echo or reverb remains in the output track. Vocal removal relies on the fact that most sound engineers record the vocal line of the track in the dead centre of your speakers. Doubling the pitch results in a one octave interval from the original note. Key - From Wikipedia - In music theory, the key identifies the tonic triad, the chord, major or minor, which represents the final point of rest for a piece, or the focal point of a section. Although the key of a piece may be named in the title (e.g. Symphony in C), or inferred from the key signature, the establishment of key is brought about via functional harmony, a sequence of chords leading to one or more cadences. Interval - An interval is the distance, in semitones, between two notes in a scale or chord. Relative keys - The relative keys are derived from the Major or minor scale and are basically good chords to go to from the one currently selected. See Cappo - A cappo is a device that can be strapped around a fretboard to raise the pitch of the strings. For example a cappo at the 5th fret will change the tuning of the guitar from. Mode - A scale that is formed using the notes of an existing scale, but starting from a note other that the original rootnote. This gives the mode a different tonality. This is the editor window. It shows an audio track with a section selected for looping. To select a section of a track, left click and drag your mouse to where you want the selection to end. You can change the beginning and end points of the selection by moving the cursor over the boundaries of the selection and left clicking and dragging to the new beginning or end point. This is useful if you are trying to learn a section of a song and want to hear it repeatedly. By right clicking on the play button you can choose how you want it to play. Right click on the editor display to clear the selection. Left clicking on the display will cause playback to start from that point. This is the Open File button. You can open multiple WAV, MP3, OGG or AIFF files to create a playlist. Alternatively you can drag and drop audio files from Windows Explorer directly onto the editor display. To listen to an audio file, click the Play button. You can click it again to stop playback. Right clicking this button will present you with the following options, Play File - Checked if no section is selected. Right click this slider to reset to zero pan. Below these three sliders are two horizontal sliders, these were a Scroll slider - Allows you to scroll through the audio display.
Zoom slider - Changes how much of the track is visible in the display. Right click for a popup menu giving you Max or Min zoom. To mind the right of these sliders is the track progress indicator, you can click this to change the position of the playback. You can right click it to set the playback position to the start of the track. This maybe is the frequency analysis window showing the notes being played in the left and right channels of a track. While a track is playing (or paused), you can move your mouse around this window to see which notes correspond to the peaks you see. If you are trying to find out what notes are played in a song, try the following procedure. In the editor if the track is amenable to vocal removal (not all tracks are), then go ahead and remove the vocal. See Advanced Vocal Removal then select an area of the track, maybe the verse or the chorus. But right click the Play button and choose Loop selection or Loop selection with pause. So click the Half speed button to play the track at half its normal speed but at the same pitch. However you haven't already done so, click the Frequency analysis button to show the window above. Now left click the Play button, simply clause the playback on any part that you want to learn. The peaks will be visible (as shown above) showing what notes were being played when you paused the track. Move your cursor to the highest peaks and press Enter, the note will appear on the virtual fretboard. Your will find that most of the peaks are clustered to the left of the display. These correspond to the bass guitar and bass drum. You can left click the frequency display and click the Hi pass button to remove all frequencies below the resulting yellow line. You can right click the display for a Lo pass filter in the same manner. To remove the Lo or Hi pass filters, simply double click on the display. Then get more definition in the display, you can lower the value in the frequency area to the right of the Lo Pass button. Right click the frequency area (default 44100) and choose from the popup menu. The lower the value you choose, the wider apart are the the notes in the display and so it will be easier to distinguish between them. However, reducing this value will result in lower quality sound reproduction. Your can increase or decrease the refresh rate of the frequency display by altering the value in the area to the right of the frequency area (default 7). A lower value will cause the display to refresh more quickly. The minimum value is 2, which equals a refresh rate of 20ms. The highest value is 15, giving a refresh rate of 150ms. This is useful for older computers that cannot process the data quickly enough, if this value is set too low, the display will stutter. If you have a modern dual core processor and plenty of memory, then you should be able to set this value to 2 without any problems. See they are currently working on an automated system that will analyse a track and then play it for you in a virtual fretboard. See Future Developments for more information. Imagine this diagram shows a right handed fretboard set to display 7 frets. It contains the pattern 'A Major' and is showing the 'Open' fingering diagram from the perspective of the player, that is, how the fretboard looks as it is held by the player. All fretboards are fully re-sizeable, just move your cursor to the bottom right corner then left click and drag. Why can open a new fretboard at any time by clicking File in the Main Menu and choosing Open Fretboard from the sub-menu (alternatively, you could use the keyboard shortcut Ctrl+F). A new fretboard will open below the current one, and have the same configuration (number of frets, perspective etc). Maximum status bar at the bottom of the fretboard shows the name of the pattern (Chord - A Major), the notes in the pattern (A C#E ) and the name of the fingering diagram (Open). By moving the cursor around the fretboard, you will also see the note corresponding to the fret and string under the cursor. The notes in red and yellow indicate the string and fret positions where the notes in the pattern occur. Yellow notes show the rootnote (the note the chord is named after) of the pattern. The purple emulator ovals show where to put your fingers to play the A major chord. You can see that they are numbered. 1 is your index finger and 4 is your little finger. 0 indicates an 'open' string, in other words the string is played without putting any fingers on the string. The yellow borders around some of the ovals indicate that the rootnote of the chord is played at that position. The blue notes at the end of the fretboard (to the left) show which notes are played on each string. When no diagram is displayed these notes show the tuning of the string. You can re-tune any string by left clicking on these tuning notes and picking a new note from the popup menu with basmati please. Too many added notes to the pattern or to delete an existing note, simply left click on the fret and string position you want. The relevant note will play. We can change the Pan , Volume and Attack (How heavily the note is played) for any string by right clicking on a string and setting the parameter required with the sliders (see diagram left). If more than one fretboard is open you can apply any pan, volume and attack changes to all fretboards by checking the 'To all' checkbox. The diagram shows that string 6 is panned to the middle, is played at full volume and full attack. Immediately re-tune any fretboard by clicking on the tuning notes at the left of the fretboard. A popup menu will appear containing the possible notes you can re-tune the string to. The chord diagrams available by pressing the Load Chord Diagram Button on the Button Bar will still be available, but will play differently according to the new tuning. Swelter the alter the appearance of the fretboard using the Fretboard Configuration Button on the Button Bar, or by pressing 'F' on your keyboard. This is Strung's Graphic Equalizer. It can be used to alter the tone of the virtual fretboards (or audio in the Editor) as they play. You can change the frequency affected by each slider by altering the values in the Cenre freq and Bandwidth controls. At their default settings, the first and last sliders will make no difference to the sound as the Centre frequencies of these bands are beyond the range of human hearing. They are included because each slider frequency can be adjusted and so can be brought within the hearing range. By right clicking on any of the sliders, you will be presented with this popup menu. The Lock sliders option will allow you to move all the sliders simultaneously. The Reset option will reset the slider you clicked to the default position. The Reset all option will reset all the sliders to the default position. Click the Load preset option to load a pre-defined Eq setting from the popup menu. To save the slider positions, click the Save a preset option. If you want these new patterns to be displayed in a new fretboard you should check this option. Otherwise the new pattern will replace the existing one in the fretboard. This menu is dynamically created and contains the fretboards created with the Save All Fretboards Button on the Button Bar. Guitar tuner Choose this tool to tune your guitar. Plug your guitar into the line-in socket of your sound card and make sure line-in is selected as the recording source. (See your Windows documentation or soundcard help if you don't know how to do this). Once you have your guitar connected, click 'Start' in the tuner and pluck each string close to the bridge (this eliminates transient harmonics). The pitch of the string will be displayed. When the display shows a green note, the string is in tune. Metronome Left click on the metronome to it. Use the dials to alter the volume, tempo, Beats Per Bar, and Swing. Right click the background of the metronome to bring up the parameters window which allows you to change the pan amount, pitch of the sound and the sound used. Piano Choose this option to view the piano keyboard display, rotation choose this menu option to show the notation display. You can press display both of these windows simultaneously. This menu contains a series of lessons for beginners. Strung interface tour Brings up this help file. How to register Information on how to register your 30 day trial version of Strung. About Links to our website, e-mail and information about 3rd party software used in Strung. This is the pattern generator dialog. It consists of three tabs containing Chords, Scales and a special tab that lists all the patterns containing the notes displayed in the current fretboard. You can save and load arpeggios using the buttons below the input area. To change the length of time each note in the arpeggio is played, use the 'Note duration' button. In this example, the play settings diagram shows that the strings have been panned left and right using the String parameters dialog which is available by right clicking on a string in the virtual fretboard. If a scale is displayed in the current fretboard, this tab will be inaccessible. If you choose a scale from the Pattern Generator or by clicking on the virtual fretboard, the Scale tab will display automatically. You cannot switch to this tab unless a scale is displayed on the current fretboard. You can alter the play direction, play modes, change the string that the rootnote of the scale is found on and change the length of time each note is played. Strung can also change the method it uses to generate a scale diagram. Usually, Method 1 will suffice but occasionally you may find the way Strung plays the scale to be difficult to emulate. If this is the case use the 'Method' dropdown menu to switch to Method 2. Sometimes, method 2 will be the same as method 1, this means Strung has already found the best way to play the scale. When playing a scale, the previous note will stop when the next note is played. To change the length of time the last note in the scale is played, use the 'Note duration' button. Use the Sequence tab to create songs from the scale, strum and arpeggio patterns in any open fretboards. The list on the left of the dialog shows the available patterns open in each fretboard and whether they are set to play a strum, arpeggio or scale. Double click on a pattern in this list to add it to the patterns used list on the right. To alter the number of repetitions of the pattern, change the value in the 'Repetitions' box just below the available patterns list (or right click the list and choose from the popup menu). If you change the pattern in any of the open fretboards they will be reflected in these lists. You can save and open sequences using the buttons provided. The three patterns are listed on the left. Right click this list and choose 2 from the repetitions popup menu. Now double click each pattern in turn to add them to the patterns used list on the right. To complete the sequence double click 'A Major Strum' once more. Now click the play button. To erase the sequence, right click the patterns used list and choose 'Delete all' from the popup menu. The Speed and Interval sliders alter the timing of the current fretboard only. To apply changes to all fretboards, right click the slider and choose from the popup menu. The Play button has two modes. You can play the sequence in one fretboard, or by right clicking the play button and de-selecting 'Play in single fretboard' the sequence will play in each of the open fretboards in turn. The Button Bar contains options enabling you to alter the way the virtual fretboards operate. When moving the cursor over any of the buttons, the Info Bar will show a brief description of the button in question. The buttons are enabled or disabled according to the pattern displayed in the current fretboard.
You can alter the appearance of the current fretboard using the Fretboard Configuration Button or by pressing 'F' on your keyboard. You will be presented with the menu below. The Notes option, if checked, will show the notes in the pattern wherever they occur on the fretboard. Un-checked, the fretboard will only show chord diagrams. If you don't want to know the names of the notes in the pattern, check the As dots option, the notes will appear as red and yellow ovals instead of the note names.